SPECIFICATIONS:
21 mil Cotton Poly Blend Canvas Aqueous Inkjet Media
for use with dye and pigmented inkjet printers.
PCCAN canvas is a 21 mil (400 gsm) cotton polyester blend canvas. This canvas is 65% polyester, 35% cotton with a 2 over 1 Oxford weave. This gives the product better flexibility for being stretched, sewn, or grommeted. The coating allows for greater consistency from print to print. Water resistant coating with pigmented inks. Universal compatibility on Canon, Epson®, and HP® printers.
Physical Properties*
•
Caliper: 21 mil
•
Basis weight: 400 gsm
•
Opacity: > 98%
•
Whiteness: > 125 CIE
•
Fabric Weave: Oxford 2 over 1
*Target Values
Features
•
Bright white
•
Water resistant
•
Stretchable, sewn, or grommets
Recommended Storage Conditions and Shelf Life
•
Temperature: 70 °F (15-30 °C).
•
Relative Humidity: 50%.
•
Repack opened rolls when not in use.
•
One year at conditions noted above.
•
Allow material to stabilize to room
conditions 24 hours before use.
Environmental, Health,
and Safety
•
No Material Safety Data Sheet required.
•
Waste not suited for recycling.
Main Applications
•
Photography and photographic prints
•
Art reproductions
•
Museum art
•
Indoor décor prints
Printer/Ink Compatibility
Recommended for use in most aqueous based inkjet printers including: Canon imagePROGRAF series, Epson® Ultra Chrome and K3 series, and Hewlett Packard® Z series printers.
Finishing Recommendations
A clear fixative may be used to enhance the print longevity. Use only pigmented inks to obtain optimum water and fade resistance. Laminates are not recommended.
Important
Printer and driver settings need careful set up to ensure the best performance. Appropriate ink loads must be set for the ink/printer combination being used.
Color Profiles
ICC Color profiles will improve image quality and optimize ink limits for improved drytime, wider color gamut, and more accurate color matching.
This information is presented as a general guide and is not a performance guarantee.
The user should independently determine prior to use the suitability of the material for the specific purpose.